Description

The Model 1000 HP is a high capacity, high-pressure regulator with some constructions allowing inlet pressures up to 2600 psig, used to control downstream pressure between 10 and 30 psig. Available in sizes from 1/2″ to 2″. The unique internal design allows for use in a multitude of applications, including air, steam and process fluids that normal pressure reducing regulators cannot match. The most versatile self-contained, pressure reducing regulator available to users.

Features:

Streamlined Flow Path: Straight-thru flow path reduces internal turbulence and resistance to flow, increasing stability and capacity.

High Inlet Pressures: Standard construction allows inlet pressures up to 740 psig (51.0 Barg).

High Outlet Pressures: Controlled outlet pressure up to 300 psig (20.7 Barg).

High Pressure Drop: Standard construction with extended guiding allows pressure drop up to 650 psid (44.8 Bard). This regulator is routinely applied in severe service conditions.

Flow-to-Open Plug: Provides unmatched rangeability – far greater than competitive flow-to-close designs. Highly stable at either high or low flow rates.

Versatility: Four body materials and seventeen trim material selections allow us age in a multitude of various fluids. Optional constructions extend the capability.

Protected Diaphragm Zone: Internal arrangement isolates the diaphragm from direct impingement, negating any fl ow induced instability at either low or high flow rates. Allows incorporation of dynamic boost from jet section. Uniformly registers pressure on the diaphragm.

Diaphragm Travel Stops: Incorporates mechanical stop in spring chamber to limit diaphragm up travel and in body for down travel, minimizing potential internal damage from over-travel conditions.

View more pressure control products like the HP 1000 from BBP here.